How to Disable Automatic Repair- Windows 10 Guide

Windows 10’s automatic repair feature troubleshoots and fixes common issues that trigger to prevent your computer from performing tasks correctly. In case your computer fails to start up two consecutive times, during the third boot, the process will try to detect the common startup problems and repair it. However, you can still troubleshoot and fix those startup problems manually.

So, when the automatic repair causes unexpected crashes, it is better to know How to Disable Automatic Repair.

How to Disable Automatic Repair.

Here we will walk you through the simple methods to disable the automatic repair and diagnose on your Windows 10 device. However, if you want to enable the process, we have also compiled the steps to do so. Here, follow the steps quickly and perform the process on your own.

How to Disable Automatic Repair- Simple and Easy

To disable the automatic repair service during the third unsuccessful boot of your Windows 10 computer, you can follow these steps:

  1. Open Start and search for Command Prompt using the search box, then right-click on the first result
  2. After that, select Run as administrator from the list of options
  3. Here, type “bcdedit” without the codes and hit enter
  4. You must check out the reoveryenabled and identifier values under the “Windows Boot Loader” section which should be related to these:
    1. identifier: {current}
    2. recoveryenabled: yes
  5. Then type the command given below:
    1. bcdedit /set {current} recoveryenabled no
  6. This will disable automatic repair; so you have to hit enter after typing this

Once you follow these steps, the diagnostic and repair feature will no longer be in the service. And after the third unsuccessful attempt of your Windows 10 startup, this feature will be disabled. If you want to enable this feature, you can check out the following steps. You can also read: DNS Address Could Not Be Found , Spotify Web Player .

How to Enable Automatic Repair- Simple & Easy Windows Steps

If you need the automatic diagnose and repair feature for your Windows startup, you can enable it by using these few steps:

  1. Press the Windows key to open Start and search for  Command Prompt in the search box
  2. Right-click on the upper most result and choose Run as administrator
  3. Then type the command we have given below:
    1. Bcdedit: type it and press Enter
  4. Once again, check the reoveryenabled and identifier values under the “Windows Boot Loader” section which should be similar to the following:
    1. identifier: {current}
    2. recoveryenabled: no
  5. Now the following command will help you to enable the automatic repair. After typing this command make sure to press Enter:
    1. bcdedit /set {current} recoveryenabled yes

These steps are very easy to complete and are also very effective. You can perform these steps to know How to Disable Automatic Repair. Also, if your system fails to boot your device the third time, it will automatically diagnose the error and perform the repair. And if you are facing startup problems, you can check out how to resolve startup problems in Windows 10.

Leave a Reply

Your email address will not be published. Required fields are marked *